Smart TVs have become the center of many home entertainment setups. Find out what you need to know about smart TV and its alternatives. Satellite television is prevalent in Europe and Northern Africa. This is delivered through a Set Top Box (STB) which uses a card reader to decode the scrambled satellite signals. You need to buy a card if you want to watch. But you know how people like to get something for nothing. This is being exploited.

So, I got this old Satellite Dish, and I will be moving into a apartment complex, where they offer free wifi at the pool area. Since money is tight, I want to use this wifi in my apartment, but Im about 60+ feet away, on the opposite side of the building. So I want to make the Satellite dish into a reciever, putting my USB Dongle in it, and seeing if I put it on my little Porch area, what type of signals I can pick up. So heres my question, What type of USB Extension cable should I Use? I plan to be gaming, and streaming alot, since I wont have cable.

I am just worried about getting a cheap chord, and it limiting the wifi, or the signal dissipates, get too much ping etc. I will need about 15-20 Feet. Like anything digital it works or it doesn't. A cheap cord will work as good as a expensive one.

I think the limitation on distance for USB is 15ft. This is a little tricky to get the USB at the focal point. Most antenna are not round so it is not obvious when you point them at the source. You also have issues putting a USB dongle outside in the weather. Download Heroes Of The Kingdom Mod Apk Shadow on this page. Eventually water will get in and destroy it. For about $60 you can get outdoor antenna/bridge designed for this from ubiquiti called air grid that will work much better than anything you can hack together. Still if I read it right you intend to try to get the signal by pointing the antenna back into your apartment since it is on the opposite side to what your porch faces.

Highly unlikely you will get this to work. The building will absorb all the signal no matter the type of equipment you use. Wireless is microwave which is pretty much line of sight, to a point you can try to receive reflected signal but it is so easily absorbed. A long pole above the roof line would technically work but I suspect would no be allowed by the apartment. I have a somewhat good line of sight for it. Supposedly that satellite can pick up, up to 3 Miles away, I might keep it inside, so my neighbors dont freak out, hook it to a tripod, and put a plant in front of it so its hidden, then point it out the window. As you can see I kinda sorta have a line a sight, but very very narrow.

I could potentially it in my Screened in porch area, and use some sort of bag over the dongle, If I were to do this, I would probably get 24k Gold connectors on the wires, Tho I really want to avoid that, those wires are expensive. The Satellite will be about 15-20 feet away from my PC, since my PC will be hooked up in the living room, and I will be running it along the wall so the wire is not noticable. It worth a try I guess pretty cheap if you have the dish already. It is very tricky to get it pointed just right though. The signal on the oval dishes comes in at a angle so when you point it at something on land the end of the arm looks like it is pointing to the ground.

These are very hard to get working since there is no nice signal level meter like a satellite receiver has. This is the product I like the best when I need to buy inexpensive ones. I linked this company not because it is the cheapest place to get this but because they sell lots of other things like it. Some of the units are very small and would be not likely noticed as much as a big dish. They are a little expensive because it is cheaper to just use a physically big antenna rather than a high tech antenna design.

FTA satellite receivers, also referred to as free-to-air receivers, are devices that receive unscrambled satellite signals from an attached dish. These stations differ from those received by pay-to-use services (DirecTV, Dish Network), although you are going to obtain the same local station information (this information is free to any digital television). FTA is different from standard over the air (OTA) antennas as these antennas only give you local stations, while FTA satellite equipment is capable of receiving any unscrambled satellite signal from around the world, regardless of the system's current location. In order to obtain these stations, you need to reprogram, or 'Hack' the FTA receiver. Doing so is legal, as you are not stealing any content. In fact, there are satellite receiver websites that provide you with the programming codes required to perform the task.

Look on the FTA receiver's user manual. Here you are able to find the brand of the FTA receiver, and the exact model number. You need this information to obtain the correct files. Because it is the digital receiver that accepts the FTA satellite signal, you are able to use any satellite dish, including those designed for DirecTV and Dish Network. There are several specific FTA satellite receiver manufacturers, including Viewsat, Coolsat and Prosat. Open an Internet browser, and navigate to the FTA satellite receiver's manufacturing website. Once on the site, select the model receiver you are currently using.

Click the download link next to the most recent FTA file link. This is usually listed at the top of all available downloads (the release date is printed next to the link).

Right-click the download file, and choose 'Extract' (the files download in a.zip format). This loads the extraction application onto the computer, usually on the desktop.

Follow the prompts to unzip the data from the downloaded file. Plug a USB flash drive into a USB port on the computer, then click 'Start,' 'Computer' and double-click the flash drive icon. Once the window opens, click-and-drag the extracted FTA files into the open window. Close the window, and remove the USB flash drive from the computer once the files have finished copying. Power down the FTA receiver, and plug the USB flash drive into the USB port, located on the rear of the device.

Turn the equipment on, and the FTA data files upload to the receiver, programming ('hacking') the device in order for you to receive the latest FTA stations.